Free blank samples Quote within 12 h Origin: Shandong, China
(01) Overview
Why choose this end
Our ends are made from 5182 aluminum alloy with an internal epoxy or BPA-NI coating and compound-lined curl for a hermetic double seam. Tabs can be coloured, laser-marked or embossed for brand recognition and anti-counterfeit purposes.
(01)
Seamer-proven
Countersink depth, curl height and compound weight are measured on every lot to secure a reliable double seam.
(02)
B64 or CDL
Choose the profile your seamer is set up for; CDL saves aluminum per end.
(03)
Brand the tab
Coloured tabs, laser marks and embossed messages turn the end into a branding and promotion surface.
(04)
Pairs with our cans
Order cans and ends together and receive a dimensionally matched, pre-tested pair.
(02) Specifications
Technical specifications
Values are nominal. We confirm a dimensioned drawing for your filling line before production.
Drawing · 202# end (top view)Nominal · mm
202# SOT Beverage Can Ends (B64 / CDL) specifications
Need a size that is not listed? Many custom heights and necks are possible.
202# SOT Beverage Can Ends (B64 / CDL) sizes
Size
Dimension
Use
200#
Neck 50.2 mm
Slim 185–250 ml
202#
Outer Ø 59.40 ± 0.15 mm
Standard / sleek / tall 250–568 ml
206#
On drawing
Wide-neck cans
209#
On drawing
1 L and wide-mouth cans
(04) Applications
Typical applications
Beer
Carbonated soft drinks
Juice
Energy drinks
Sparkling water
(05) FAQ
202# SOT Beverage Can Ends (B64 / CDL) FAQ
What is the difference between B64 and CDL ends?
Both are 202 beverage ends. CDL has a modified countersink and chuck-wall geometry that uses less aluminum. Your seamer chuck must match the profile, so tell us which one your line runs.
Can you colour the tab only?
Yes. Tabs can be anodised or coated in a different colour from the end panel, for example a blue tab on a silver end.
